O’Shea’s Aqua Dipp

“customizing your lifestyle”

OAD Hydrographic Tanks / Water Transfer Printing Tanks

 New!

O'Sheas's Aqua Dipp Montana's Hydrographic Specialists offers its customers quality American made hydrographics tanks. It has been a long time coming with a lot of research and development into making an affordable tank for the budget minded customers. Our tanks feature quality parts and all major parts are ul listed (pump, control box, switches, heater). Our tanks are made of stainless steel and offered in various sizes and Include a 1 year warranty.   


Stainless Steel Tank

Complete stainless, this is the ultimate tank! No need to worry about coating it or anything.  It is ready to go the day it arrives.

  • Constructed from 304 Grade stainless steel from American metal suppliers

  • 100% tig welded, every seam, fitting etc. is tig welded. No sloppy mig welds on these tanks.

  • Incoloy heating element

  • Water hose drain valve

  • Timer with buzzer feature - set your time - push the button and let it count down for you. No need to watch the clock. There is a lighted buzzer to let you know when the time is up.

  • Double filtering system insures no used film is sucked into the pump - insures clean water

  • Unique spray bar has removable nozzles so they can be cleaned if needed.

  • Tank incorporates bent ribbing into the side of the tank to keep it solid, there is no extra metal welded to the outside of the tank, making it very clean and sleek looking

  • Uses heavy duty castors for moving around the shop when not filled. It is highly recommended to be installed on wooden blocking to support it along with leveling the tank

  • Industrial controls - We use American made push buttons and hard parts like the control box. However, the thermostat and timer are imported but are tried and true

  • All other parts such as heater, pump, etc. can easily be sourced from local vendors. Making it easy to replace these parts if something were to happen, no long wait times for replacement parts.

  • Complete unit is built and assembled in America. Every tank that is built is tested, nothing leaves here untested. The unit is fully assembled, you do not need to assemble anything when you get it.

Small Tank 28" x 5'x 16"

 

Medium Tank 3' x 69" x3'

 

Large Tank 4' x 8' x 3'

     

$4,000 1 Year Warranty* Included
***Stainless Steel Stand Included***

$6,600 1 Year Warranty* Included

 

$8,100 1 Year Warranty* Included

 

 Working Area Inside Tank

Front
to
Back

Deep

Long

24"

16"

46"

Outside Space Requirements

Front
to
Back

Deep

Long

28"

16"

5'

 Working Area Inside Tank

Front
to
Back

Deep

Long

29 1/2"

36"

55"

Outside Space Requirements

Front
To
Back

Deep

Long

36"

36"

72"

Working Area Inside Tank

Front
to
Back

Deep

Long

41 1/2"

36"

83"

Outside Space Requirements

Front
to
Back

Deep

Long

48"

36"

96"

Included

4 long "dams"
3 short 6" dams
3 12" dams

we can also make extra dams if you would require them

Not Included
water
power cord - there are several different ways to wire this unit in and to help save some money we do not include a cord.

Electrical Requirements

4 wire hook up, 2 hot legs, 1 neutral, 1 ground

Unit requires 220-240v single phase electric
unit draws 65 amps

12kw incoloy heating element

120v water pump

120v controls (thermostat, timer and buzzer)
you must run a gfci with this unit to prevent electrical shock

Control Specs

digital temperature controller standard
power on switch
push button pump operation
heater on switch / heater will only run when pump is on
switches and enclosure are nema rated and UL listed




Payment

Orders may be placed over the phone or through email, ccb@osheasaquadipp.com
Tanks are built per order and typically average 5-6 weeks for completion, periodically we do have tanks ready to go depending on the  size you are ordering.

Payment for tank is Due at time of order.  

Freight charges will apply as tanks are shipped truck freight - unless picked up at our Fabrication Location.

Warranty
A 1 year Limited Warranty is included with purchase of tank for parts replacement.   Malfunctioning parts will be returned to O'Shea's Aqua Dipp for inspection and replacement prior to replacement.   Customer will be responsible for shipping of malfunctioned parts to OAD.  We will cover shipping of new / replacement parts. 

cache/wst.opf.3497462.xml

O’Shea’s Aqua Dipp

Chet (406) 459-8773
ccb@osheasaquadipp.com